Original
By certification 
Technical Parameters
| Model | PME-460FB |
| Dimension | 2600*1900*2450mm |
| Basket | 460*220*200mm |
| Throughput | 12-15min/basket |
| Basket load | 30-50KG |
| Chamber | ф400×570mm |
| Distillation | 150L |
| Application |
Auto parts, Press,Forging,Powder metallurgy, Finishi machining,Heating treatment, Electronics etc. |
| Cleaning Parts | Auto parts, Heat exchanger fins,Battery parts,Bolt & nut, Bearing parts etc. |
Cleaning Process
The Fully Enclosed Vacuum Cleaning Machine is conceived to employ, in absolute safety, the hydrocarbon solvents belonging to the class AIII (Flash-Point > 56°C) or alternatively the Modified alcohols solvent (glycol-ethers) and ensures the best cleaning quality by taking advantage of the hermetic operation under deep vacuum, which ensures the best cleaning results on complex surfaces, inside cavities and blind holes.
According to the shape and the characteristics of the workpiece, different cleaning methods like spray, soaking, ultrasonic, rotation, swing, rinsing, steam washing and vacuum drying, etc., are selected to implement cleaning process. Cleaning time is programmable.
Product Features
■ Small footprint and low consumption
■ Suitable for hydrocarbon and modified alcohol
■ Vacuum and high temperature ultrasonic wash
■ Circulation and distillation, no emission
■ Low consumption solvent as 0.15L/H
■ PRO-FACE, SIEMENSE, MITUSBISHI and other worldwide well-known components
■ Easy-to-handle and friendly HMI
■ Multi-language to satisfy different requirements
■ Program remote monitoring
■ Variable customized baskets available
Frequently Asked Questions
Why use ultrasonics?
Ultrasonic technology is capable of delivering detergent into fine-pitch apertures where spray systems cannot penetrate. High-pressure spray systems are known to bend delicate land mass areas between fine-pitch apertures. In addition, spray systems will "broadcast" the solder paste throughout the cleaning chamber causing solder ball contamination of misprinted PCBs.
Are all ultrasonic cleaning machines the same?
Yes and no.
They are similar in that they all use ultrasonic cavitation as the mechanical scrubbing action. However, some require very high ultrasonic power because of the poor cleaning characteristics of the chemistry used. It has been demonstrated that high power ultrasonics can damage populated PCBs. The cleaning efficiency of our detergent allows the ultrasonic cleaning machines to use the lowest effective ultrasonic power in the industry, assuring safety when cleaning populated misprints yet effectively cleaning PCBs better than any other process. Without the proper chemistry, all ultrasonic stencil cleaners are similar. Some may have a few more "bells and whistles", some may be better engineered ergonomically or for ease of use, but they all use ultrasonic cavitation as the mechanical scrubbing action.
Customer Service
PERIODIC ANALYSES
Exact indications on periodic stability, cleaning ability and pH analyses to be performed on the solvent used and introduction c/o the main suppliers of chemical products.
MANAGING ENVIRONMENTAL PROCEDURESReal support for managing environmental procedures and complementary information on applicable standards in force, and further concerning atmospheric Emissions, Waste disposal, Management of water resources, Noise and acoustic emissions and Hygiene.
Application Case
http://www.prudence-me.com/
